VIP X1 Installation and Operating Manual

EN 129

 

 

Communication with terminal program

Data terminal

If a VIP X1 cannot be found in the network or the connection to the network is interrupted, you can connect a data terminal to the VIP X1 for initial setup and setting of important parameters. The data terminal consists of a computer with a terminal program.

You require a serial transmission cable with a 9-pin Sub-D connector to connect to the computer and open ends for connection to the terminal plug of the VIP X1 (pin assignment see page 127).

HyperTerminal, a communications accessory included with Microsoft Windows, can be used as the terminal program.

Note

Information on installing and using HyperTerminal can be found in the manuals or in the online help for MS Windows.

Disconnect the VIP X1 from the Ethernet network before working with the ter- minal program.

Connect the serial interface of the VIP X1 using any available serial interface on the computer.

Configuring the terminal

Before the terminal program can communicate with the VIP X1, the transmission parameters must be matched. Make the following settings for the terminal pro- gram:

19,200 bit/s

8 data bits

No parity check

1 stop bit

No protocol

Bosch Security Systems 2006-12 V2.5

Appendix

Page 129
Image 129
Bosch Appliances VIP X1 manual Communication with terminal program, Data terminal, Configuring the terminal

VIP X1 specifications

Bosch Appliances has long been synonymous with quality and innovation, and their latest offering, the Bosch Appliances VIP X1, exemplifies their commitment to excellence in home technology. This state-of-the-art appliance integrates advanced engineering with user-friendly features, designed to elevate the modern home experience.

One of the standout attributes of the Bosch VIP X1 is its energy efficiency. It utilizes smart technology to optimize power consumption without sacrificing performance. With high energy ratings, this appliance helps consumers reduce their carbon footprint while keeping utility bills in check. This eco-friendly approach aligns with Bosch's commitment to sustainability and responsible manufacturing practices.

The VIP X1 is equipped with Bosch’s signature Precision Wash System, which ensures that every dish is thoroughly cleaned. This system uses advanced sensors to detect soil levels and adjusts the washing cycle accordingly, ensuring optimal cleaning performance. Coupled with the Quiet Operation technology, the VIP X1 operates at a whisper-quiet level, making it perfect for open-concept living spaces.

User convenience is further enhanced by the smart connectivity feature. Homeowners can remotely monitor and control the VIP X1 through the Bosch app, providing the flexibility to start, stop, or adjust cycles from anywhere. This feature not only adds convenience but also integrates seamlessly into smart home systems, making it a perfect fit for tech-savvy consumers.

The Bosch VIP X1 also boasts a sleek, modern design that complements any kitchen decor. Its intuitive interface features easy-to-use controls, allowing users to navigate through settings with simplicity and ease. The large capacity ensures that even the most demanding households can rely on the VIP X1 to handle their dishwashing needs.

Safety is another priority for Bosch, and the VIP X1 comes equipped with multiple safety features, including a child lock and leak detection system. These innovations provide peace of mind for families, ensuring a safe home environment.

In summary, the Bosch Appliances VIP X1 combines energy efficiency, advanced cleaning technology, smart connectivity, and user-friendly design. This appliance not only simplifies everyday chores but also enhances the overall home experience, making it a worthwhile investment for any modern kitchen. With the VIP X1, Bosch continues to set the benchmark for quality and innovation in home appliances.