Bosch Appliances Restart, Additional parameters, VIP X1 Installation and Operating Manual

VIP X1 Installation and Operating Manual EN 131

–Enter 1 again. The terminal program displays the current IP address and prompts you to enter a new IP address.

–Enter the desired IP address and press Enter. The terminal program displays the new IP address.

–Use the displayed commands for any additional settings which you require.

Note

You must restart to activate the new IP address, a new subnet mask or a gateway address.

Restart

Briefly interrupt the power supply to the VIP X1 for a restart (disconnect the power supply unit from the mains supply and switch on again after a few sec- onds).

Additional parameters

You can use the terminal program to check other basic parameters and modify them where necessary. Use the on-screen commands in the various submenus to do this.

Bosch Security Systems 2006-12 V2.5 Appendix