VIP X1 Installation and Operating Manual | EN 53 |
|
|
iSCSI LUN map
The LUN map displays the logical drives configured for the iSCSI storage device. The current user is displayed for each drive.
–
–If the logical drive is password protected, you must first enter the password in the Target password field and click the Set button.
Note
In cases where the information cannot be read due to the network topolo- gy, you must enter the data manually, so that the VIP X1 can access the drive. In this case you should ensure that the entries correspond exactly with the configuration of the iSCSI device.
–After entering all the settings in the relevant fields, click Set. The VIP X1 attempts to create a connection to the required drive using this data.
As soon as a connection has been established, the selected drive is used for recordings.
Target IP address:
Enter the IP address of the required iSCSI server here.
Target node:
Enter the number of the iSCSI server target node.
Target LUN:
Enter the LUN of the required drive.
Target password:
If the drive is password protected, enter the password.
Note
You may not enter a new password. This is only possible by configuring the iSCSI storage device.
Bosch Security Systems | Configuration using a Web browser |
