| VIP X1 Installation and Operating Manual | EN 9 | |
|
|
|
|
| Safety information | 2 |
|
Electric shock hazard
❚Never attempt to connect the unit to any power network other than the type for which it is intended.
❚Use only the power supply unit provided.
❚Never open the housing.
❚Never open the housing of the power supply unit.
❚If a fault occurs, disconnect the power supply unit from the power supply and from all other units.
❚Install the power supply and the unit only in a dry,
❚If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. Safe operation is no longer pos- sible in the following cases,
–if there is visible damage to the unit or power cables,
–if the unit no longer operates correctly,
–if the unit has been exposed to rain or moisture,
–if foreign bodies have penetrated the unit,
–after long storage under adverse conditions, or
–after exposure to extreme stress in transit.
In such cases, have the unit checked by Bosch Security Systems.
Bosch Security Systems | Safety information |
