VIP X1 Installation and Operating Manual | EN 119 |
|
|
Connect on alarm
With the appropriate configuration, a connection between a sender and a receiver is made automatically when an alarm is triggered (see page 70). After a short time the live video image from the sender appears on the con- nected monitor.
This option can also be used to connect a sender and a compatible receiver using a switch connected to the alarm input. You do not need a computer to make the connection in this case.
Connecting with a terminal program
Various requirements must be met in order to operate with a terminal program (see page 129).
–Start the terminal program and enter the command 1 in the main menu to switch to the IP menu.
–Enter the command 4 in the IP menu to change the remote IP address, then enter the IP address of the unit you wish to connect to.
–Return to the main menu by entering the command 0. Then enter the com- mand 4 to switch to the Rcp+ menu.
–In the Rcp+ menu, enter the command 5 to activate the automatic connec- tion.
Closing the connection with a terminal program
–Start the terminal program (see page 129) and enter the command 4 in the main menu to switch to the Rcp+ menu.
–In the Rcp+ menu, enter the command 5 to deactivate the automatic connec- tion.
Bosch Security Systems | Operation |
