![Connections](/images/new-backgrounds/191748/19174839x1.webp)
EN 20 | Installation and Operating Manual VIP X1 |
|
|
Connections
Cameras
You can connect one video source to the VIP X1. Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable.
–Connect the camera or another video source with a video cable (75 Ohm, BNC connector) to the BNC Video In sockets.
–If the video signal is not looped through, termination is performed by a soft- ware setting if necessary (see Video input, page 46).
Audio connections (audio version only)
The audio version of the VIP X1 has two audio ports for audio line signals as well as a microphone input and a loudspeaker output.
The audio signals are transmitted
Note
If possible you should use the line ports of the intercom for transmitting au- dio signals on the intercom systems. The following specifications should be complied with in all cases.
Line In: | Impedance 9 kOhm typ., 5.5 |
Line Out: | Impedance 16 Ohm min., 3 |
MIC (microphone): | Impedance 2 kOhm typ., 2.8 |
| |
SPK (speaker): | Impedance 4 Ohm min., 6 |
| power output RMS 1 W |
Installation | Bosch Security Systems |