BM 2610007877
Assembly
Unpacking and Checking Contents
Unpacking the Miter Saw – When removing this tool from packaging materials, reach down to the two side
!WARNING To avoid severe pinching, never lift or move this saw by gripping
any component of the mechanism support system.
This symbol is placed at various locations on the tool to warn the user of
Checking Contents in package – Open the top of the package and look for the included loose parts. Refer to the diagram below.
Some small parts such as the bevel lock lever and miter lock knob require attachment to the tool before it is ready for use – See “Attaching Loose Parts” on page 12.
!WARNING To avoid possible injury, always disconnect plug from power
source before performing any assembly, adjustments or repairs.
Loose Parts - 1 of each shown
10mm Flat Washer | Workpiece Clamp |
Check off for each part
Manual
Bevel Lock Lever
6mm Flat Washer 6mm Lock Nut
10 mm Socket Tool
6/4mm Hex Key
Dust Bag
Operating/Safety Instructions
Miter Lock Knob
10.