BM 2610007877
Assembly
Tools Needed for Assembly and Alignment
Combination Square | #2 Phillips Screwdriver | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10mm Socket | 6/4mm Hex Key | ||
(supplied) | (supplied) | ||
|
|
|
|
|
|
|
|
NOTE: A 6mm and a 4mm hex key can be substituted for the supplied 6/4mm hex key.
Combination Square Must Be True - Checking Combination Square
1. Position square and | 2. | Flip square (shown in dotted position) | |
draw a light line | 3. | Check edge of flipped square against | |
3/4" board with | |||
| the drawn line. There should be no gap | ||
straight top edge |
| or overlap at the bottom end. | |
drawn line | no gap or overlap | ||
11.
