Bosch Power Tools RA1171 manual Attach the Door Figs, If the magnetic catch does not contact

Router Table Assembly

ATTACH THE DOOR (Figs. 6 and 7)	FIG. 6
HINT: Applying bar soap or bees wax to the screw
threads will make them easier to install into the panels.
1. With the bumps on the catch plate against the door		13B
surface, attach the metal catch plate (13B) to the
inside of the narrow end of the door with a 5/8″ lg.
flat-head Phillips wood screw (35). The edge of the	35
catch plate should be even with the edge of the door

(Fig. 6).

2. Attach the door hinges (12) to the left side panel with two 5/8″ lg. flat-head Phillips wood screws (35) on

Back Side of Door

each hinge (Fig. 7).

3. Attach the magnetic catch (13A) to the inside of the right side panel using two 5/8″ lg. flat-head Phillips wood screws (35) (Fig. 7).

4. Slowly open and close the door, making sure that it moves freely and does not rub on the base or top, does not come in contact with the switch assembly, and that it latches correctly.

•If the door rubs, make sure the side panels and switch are assembled correctly.

FIG.7

12

35

• If the magnetic catch does not contact the 35

catch plate, loosen the screws on the magnetic catch and reposition it using the slotted holes in the catch.

12