Bose 3.2.1 GS Series II, 3.2.1 Series II manual If your TV does not have audio output jacks

System Setup

If your TV does not have audio output jacks

If your TV does not have audio output jacks, you will need to feed audio to the 3•2•1 home entertainment system through a secondary source, such as a VCR. To do this, you will need one additional video cable, which can be purchased at your local electronics store.

1.Connect one end of the supplied stereo cable to the AUX Audio IN jacks on the rear panel of the media center (Figure 13). Insert the white RCA plug into the AUX white L jack. Insert the red RCA plug into the AUX red R jack.

2.Connect the other end of the stereo cable to the AUDIO OUT jacks on your VCR. Insert the white RCA plug into the white AUDIO OUT L jack. Insert the red RCA plug into the red AUDIO OUT R jack.

3.Insert one end of the supplied video cable (yellow) into the VIDEO OUT jack on the back of your VCR. Insert the other end of the supplied video cable into the Video IN C (composite) jack on the back of the media center.

4.Insert one end of the second video cable (yellow) into the Video OUT C (composite) jack on the back of the media center. Insert the other end of the second video cable into one of the video input jacks on your TV.

Figure 13	Remember the name of the TV video input you plugged the video cable into (for
System setup when TV has	example: Video 1, Input 1, or Aux). Later, you will need to select the corresponding
no audio output jacks	video input on your TV in order to view the 3•2•1 system video output.

		Cable/satellite box
			Existing
	Video cables	VCR		cable
	(yellow connector)
Media center rear panel

	VCR	Existing
	connection
Stereo cable	panel	cable
(red and white connectors)
IMPORTANT
If you connected your TV and VCR this way, you	TV
will need to turn on your VCR and select the

AUX source on the 3•2•1 remote to hear sound from TV programs.

TV connection panel

English

17