English

Operation

Erasing a preset

1.Tune to the preset station.

2.Press and hold the 0 button on the remote until the media center display tells you that the preset is erased.

Playing other sources

Turn on any component connected to the media center by using the remote for that compo- nent or controls on the component front panel. Use the 3•2•1 Series II or 3•2•1 GS Series II system remote to get started:

Pressing TV, CBL-SAT,or AUX on the 3•2•1 or 3•2•1 GS system remote turns on the system and selects the audio for that component. Be sure a tape or disc is loaded, as needed.

Use the Volume up or down arrows on the system remote or on the media center to raise or lower the volume of the system.

Using the sleep timer

Your system includes a sleep timer which can be set to turn your system off automatically after 1 to 90 minutes of listening to any source. This timer can be accessed through the Settings menu for any source. See “Changing Source Settings” on page 39.

Note: The sleep timer will not turn off the TV or other audio device.

34

Page 34
Image 34
Bose 3.2.1 GS Series II, 3.2.1 Series II manual Playing other sources, Using the sleep timer, Erasing a preset