System Setup

Connecting the power cord

English

Figure 20

Connecting to power

CAUTION: For dual voltage models only, be sure to set the dual voltage switch on the back of the Acoustimass® module to the appropriate voltage for your area (115V or 230V) before con- necting to power. If you are not sure about the proper voltage for your area, consult your local electrical authorities.

1.Insert the small connector end of the power cord into the AC INPUT connector on the Acoustimass module (Figure 20).

2.Insert the large end of the cord into an AC power (mains) outlet.

Note: On 220-240V models only, turn the Acoustimass module POWER switch to on (l).

AC power

 

switch

 

 

Note: Provided only on 220-240V

 

rated systems

115/230V

 

selection

 

switch

 

115V

Note: Provided only on 115/230V

dual voltage rated systems

 

AC input

 

jack

 

24

Page 24
Image 24
Bose 3.2.1 GS Series II, 3.2.1 Series II manual Connecting the power cord, Rated systems, Dual voltage rated systems