System Controls and Indicators
English
Remote control
Remote | On | |
Off | ||
status | ||
| ||
LED |
|
AUX
Turns the system on or off.
Status LED:
•Remains off (unlit) during normal operation.
•Remains on during setup mode. Turns off briefly with each key press.
•Blinks rapidly eight times if the wrong key is pressed during setup or if an unavailable device code is entered.
•After ten seconds of no key presses, blinks rapidly eight times and the remote exits the setup mode.
Silences or restores the sound from the current source.
Selects the
•Selects the
•Switches between FM and AM when the tuner is selected.
TV: Turns your system on and selects the TV input as the sound source.
Input: Changes the external input to your TV. For example, your TV might have two external inputs where one is connected to your cable box and the other to your VCR. Pressing this button alternates between the cable box and the VCR.*
On/Off: Turns your TV on and off.*
On/Off: Turns your cable/satellite box on or off.*
AUX: Turns your system on and selects the AUX input as the sound source.
On/Off: Turns a VCR or DVR that is connected to the AUX jack on or off.*
*Requires special remote settings. See “Setting up your remote to control other audio/video devices” on page 35.
26
