![](/images/new-backgrounds/1198634/19863425x1.webp)
System Setup
Figure 8
Separating left and right speaker cords
Figure 9
Left and right speaker connections
2.At the other end of the speaker cable, separate the left and right speaker cords as much as necessary to reach each speaker (Figure 8).
Note: If you purchased a 3•2•1 GS Series II system, the left and right speaker cable connectors will be marked with a “GS”.
3.Plug the LEFT speaker cable into the rear jack of the left speaker (Figure 9). Plug the RIGHT speaker cable into the rear jack on the right speaker.
| T |
|
| H | T |
IG | ||
R |
| F |
|
| LE |
RIGHT | LEFT | |
speaker | ||
speaker | ||
cable | ||
cable | ||
|
Note: Make sure cable connectors are fully inserted and seated firmly in the speaker jacks.
13