Bose 3.2.1 GS Series manual Changing channel selection control, Verifying an entered device code

Controlling Other Audio Devices

Verifying an entered device code

In case you need to check to see what code the remote is using for a particular audio device, do the following:

1.Press and hold a source key (TV, CBL-SAT, or AUX) until the remote LED lights (about five seconds)

2. Press the Info button.

3.Press 1 on the remote and count the number of times the LED blinks (zero is indicated by a long blink). This is the first digit.

4.Press 2 on the remote and count the number of times the LED blinks (zero is indicated by a long blink). This is the second digit.

5.Press 3 on the remote and count the number of times the LED blinks (zero is indicated by a long blink). This is the third digit.

6.Press 4 on the remote and count the number of times the LED blinks (zero is indicated by a long blink). This is the fourth digit.

7. Press Exit.

Changing channel selection control

If you are using your 3•2•1 home entertainment system with other audio devices, such as a VCR and cable/satellite box, you may wish to change channels using one of these other audio devices rather than your TV.

You can easily switch your 3•2•1 remote to change channels on another audio device:

1.Press and hold Last on the 3•2•1 remote. The remote status LED will illuminate and blink the number of times corresponding to the device controlling channel selection.

1 blink = TV

2 blinks = CBL-SAT

3 blinks = AUX

2.After the blinking stops, press the source button (TV, CBL-SAT,or AUX) that corre- sponds to the device you want to use for channel selection.

3. Press Exit on the 3•2•1 remote.

To confirm, press and hold Last on the 3•2•1 remote and count the number of blinks. If the change was made, press Exit. If not, repeat steps 2 and 3.

38