System Setup
Connecting the power cord
Figure 20
Connecting to power
CAUTION: For dual voltage models only, be sure to set the dual voltage switch on the back of the Acoustimass® module to the appropriate voltage for your area (115V or 230V) before con- necting to power. If you are not sure about the proper voltage for your area, consult your local electrical authorities.
1.Insert the small connector end of the power cord into the AC INPUT connector on the Acoustimass module (Figure 20).
2.Insert the large end of the cord into an AC power (mains) outlet.
Note: On
AC power |
| |
switch |
| |
| Note: Provided only on | |
| rated systems | |
115/230V |
| |
selection |
| |
switch |
| |
115V | Note: Provided only on 115/230V | |
dual voltage rated systems | ||
| ||
AC input |
| |
jack |
|
24
