Assembly Guide

Step 24 - Route the Lat Cables

Locate the following items:

Item #S - (2) Hand Grips

Item #R - (1) Bent Lat Bar (optional)

Item #Z - (2) Lat Cables with (2) Snap Hooks (attached)

Un-wrap the Lat Cables with Snap Hooks from both Pulleys on the Lat Cross Bar. Pull one end of the Cables down from the Lat Cross Bar, and fasten to the Chest Cable Snap Hook.

Fasten the attached Snap Hook from the Lat Cable to a Hand Grip or the Bent Lat Bar. Repeat for remaining Lat Cable.

Figure 24 - Lat Cables

Snap

Hook

Hand Grips

or Bent

Lat Bar

Snap

Hook

Step 25 - Route the Leg Cables

Locate the following items:

Item #AA - Leg Cable

From Step 14 - Leg Extension Seat Assembly

Un-wrap the Cables from the Rear Leg Pulley.

Pull one end of the “Y” Cable away from the Rear Leg to fasten to a Snap Hook on the Rod Cable.

Note: For this step, make sure your Leg Extension Seat is installed.

Figure 25 - Leg Cables

Snap

Hook

Leg

Extension

Seat

Step 26 - Route the Squat Cables

Figure 26 - Squat Cables

Locate the following items:

 

Item #R - Squat Bar

 

Un-wrap the Cables on each Base Leg Pulley. Pull one end of

Squat Bar

 

the Cable up from the Leg Pulley, and fasten the Cable to a Snap

 

Hook on the Chest Bar.

 

Fasten the Snap Hook attached to the Squat Cables to the

 

corresponding Squat Bar “D” Ring.

 

Repeat for remaining Squat Cable.

Snap

 

Hook

CONGRATULATIONS! You have successfully completed assembly

Snap

Hook

of your Bowflex® Elitehome gym! Please inspect your machine

 

to ensure that all fasteners are tight and everything is properly

 

assembled. Review all warnings that are affixed to the machine.

 

 

A-17

Page 19
Image 19
Bowflex ElitePlus manual Route the Lat Cables, Route the Leg Cables, Route the Squat Cables, Locate the following items