Leg Exercises
Standing Hip Abduction
Muscles worked:
Gluteus Maximus
Bench Position:
Removed
Accessory:
Ankle Cuff
Pulleys:
Chest Bar
Success Tips
•Keep your chest lifted, spine aligned, abs tight and a slight arch in your lower back.
•Do not bend from waist or lower back.
•Keep your abs tight throughout movement.
•Keep working leg straight or only very slightly bent.
•Use only a small range of motion.
START
START
•Stand to one side of the Seat Rail, one side next to Power Rods®.
•Secure Ankle Cuff around the ankle furthest from the Power Rods®. Keep leg straightened, but knee loose.
•Adjust your position so that there is some tension in the cables at the start of this exercise.
•You may use your hand on the Lower Lat Tower or Chest Bar to stabilize movement.
FINISH
ACTION
•Slowly move the attached leg outward, away from the Power Rods®, at a
•Slowly return to the Start position without relaxing tension in your leg.
•Keep your hips level during movement.
Seated Hip Adduction
Muscles worked:
Adductor Longus; Gluteus Medius
Bench Position:
Flat Bench Back
Accessory:
Ankle Cuff
Pulleys:
Chest Bar
Success Tips
•Do not cross the attached leg in front of the stabilized leg.
•Keep abs tight and do not lift your hips or excessively arch your back.
•Keep your spine straight and your hips
•Use only a small range of motion.
START
START
•Sit sideways on the bench and attach an Ankle Cuff to the ankle closest to the Power Rods®.
•Sit far enough from the Power Rods® that there is tension in the cable at the start of the exercise.
•Lift leg with cuff in front of you, at a 45° angle from your trunk (toward Power
•You may hold onto the bench for added stability.
FINISH
ACTION
•Slowly allow the attached leg to move inward, toward the center as you face forward, keeping your hips and spine perfectly still.
•Keeping the leg still, slowly move it back into the Start position.
61