Troubleshooting
Step 2: Press “Set” button to enter setting mode. “Max Setpoint” will flash to indicate setting mode.
°F Max
Setpoint
idle
Status Operational
SELECTSET
Step 3: Press the “UP” or “DOWN” buttons to change the maximum setpoint value. This will limit the maximum setpoint
the user can select. Note: The maximum setpoint is approximately 180°F.
"Max Setpoint" continues to flash while making adjustments
°F | Max |
|
| Setpoint | % |
idle |
| |
Status Operational |
| |
SELECT | SET |
Step 4: Press “Set” button to confirm new “Max Setpoint” value and stop setting mode.
"Max Setpoint" stops flashing
°F Max
Setpoint
idle
Status Operational
SELECT%SET
Page 13
13
