Troubleshooting
Step 4:
Press the “Temperature Down” button to change to the previous code index, code #9.
idle |
| % |
Status Operational |
| |
SELECT | SET |
Step 5:
Press the “Select” button for code index #9 to view if there are any code numbers.
idle
Status Operational
SELECTSET
Step 6:
Continue pressing the “Temperature Down” button to change to the next error code index and press “Select” to view the error code number, if any, for that index number. Continue on to index #1, the oldest error code index. The water heater display will store up to 10 error codes with the oldest code starting in code index #1 with the most recent code in code index #10.
Step 7: 10 seconds after the last button press, the Water Heater Display will revert back to the current error code display. To exit Service Mode, either wait 30 seconds or press Temperature Up button and Select Button for 3 seconds.
°F setpoint%
idle
Statu Operational s
&ExitingSELECTServiceSET Mode
Page 21
21
