Display of Water Temperature:
Step 1: In Service Mode, Press the “Select” button until “Water Temp” is displayed in the upper right section of the water heater display. This is the reading for the tank sensor.
| °F | Water |
|
| Temp |
idle |
|
|
Status | Operational |
|
SELECT | SET | |
To Display Flame Sense Current of the Pilot Flame Sensor:
The pilot flame sense current is available only when the burners are in operation. Step 1: Make sure the
status displays “Heating” or draw enough hot water to start the burners. Step 2: Enter the “Service Mode”
described previously. Step 3: Press the “Select” button until a number value is displayed with “Flame Current” to the right of the number. The value displayed is in microamps (µA).
Flame
Current
µA
Heating
Status Operational
SELECT 
SET 
59
