ROAMING

Scans the channels to stay connected to any available system of BELL MOBILITY.

SET MODE

Selects the Preferred System.

1.Press .

2.Select one of the following options(Home only/

Analog only/Automatic) with the navigation key,

then press .

Automatic : Scans the radio channels based on the Automatic setting.

Home only : Only within your home area or home affiliated area.

Analog Only : Stays in the analog setting until the hand set is powered on after being powered off.

FORCE ANALOG

Temporarily forces phone to use Analog mode – mode automatically ends in 10 minutes.

1.Press .

2.Select “Yes” or “No” with the navigation key, then

press to activate it.

ROAMING

NAM SETTING

Enables Auto NAM (Number Assignment Modules) or manually changes a NAM.

AUTO NAM

To automatically switch phone to the proper NAM when you have multiple NAM registrations:

1.Press .

2.Select “Yes” or “No”, then press to save it.

CHANGE NAM

To change the NAM used by the phone when you have multiple registrations:

1.Press .

2.Select a NAM (NAM1,NAM2) with the navigation

key, then press to save it.

Page 50 - Chapter 4

Chapter 4 - Page 51

Page 27
Image 27
Bretford CDM-8500 owner manual Roaming, SET Mode, Force Analog, NAM Setting