CHARGING THE BATTERY
POWER CONNECTION
Connect the charger to a standard 110V AC outlet. The battery can be charged alone, or when attached to the phone.
CHARGING THE BATTERY
The battery can only be charged when attached to the phone. The LED will indicate charging status.
●Red indicates charging is in progress.
●Green indicates charging is complete.
NOTE: 1. The battery is not charged at the time of purchase.
2. Fully charge the battery before use.
Page 14 - Chapter 1
CHARGING THE BATTERY
NOTE: 1. It is more efficient to charge the battery with the handset off.
2.The battery must be connected to the phone in order to charge.
3.If the LED flickers while charging, the battery contacts may need cleaning.
4.Once fully charged, the LED may change from red to green. This does not indicate a problem with the battery.
5.Battery operating time gradually decreases over time.
6.If the battery fails to perform normally, you may need to replace the battery.
BATTERY CHARGING TIME
Battery Type | BTR- | BTE- | |
(900mAh) | (900mAh) | ||
| |||
|
|
| |
Charging Time | minutes | minutes | |
|
|
|
NOTE: Charging time applies only when your phone is turned off. Charging time may vary if your phone is turned on.
BATTERY TALK & STANDBY TIMES
Type | PCS | CDMA | AMPS | |
Status | ||||
|
|
| ||
|
|
|
| |
Talk (min) | 157 | 150 | 103 | |
|
|
|
| |
Standby (hrs) | 113 | 103 | 25 | |
|
|
|
|
NOTE: These times are for a new battery. Talk and standby time may decrease over time.
Chapter 1 - Page 15
