Brother 1575MC owner manual Check Receiving Status, Change Answer Mode, Exit Remote Retrieval

Retrieve all faxes, press 2, then enter the number of remote fax machine followed by # #. After the beep, hang up and wait.

Erase all fax messages, press 3.

Check Receiving Status

Press 9 7

then for Fax message, press 1. Voice message, press 2.

1 long beep — Received message

3 short beeps — No messages

Change Answer Mode

Press 9 8

then for Message Center, press 1. Fax/Telephone (F/T), press 2. Fax Only, press 3.

5

Exit Remote Retrieval

Press 9 0.

MESSAGE CENTER

REMOTE RETRIEVAL ACCESS CARD

Using Remote Access Code

1 Dial your fax number from a fax machine using touch tone.

2When your fax machine answers, immediately enter your Remote Retrieval Access Code (159 ).

3Your FAX signals the kinds of messages received:

1 long beep — Fax message(s)

2 long beeps — Voice message(s)

3 long beeps — Fax and Voice No beeps — No messages

4After 2 short beeps, enter a command.

5Press 9 0 to reset the FAX when you finish.

6Hang up.

6 1

R - 2