Brother 1575MC owner manual Remote Commands Operation Details

Remote Commands

Follow the commands below to access features remotely. When you call the fax machine and enter your Remote Retrieval Access Code (159), the system will signal you with two short beeps to enter a remote command.

		Remote Commands		Operation Details
91	Playing Voice Messages			After one long beep, the fax machine plays the ICM.
	1		(Skip to back)	Press 1 while listening to an ICM to repeat it.
				If you press 1 before a message, you will hear
				the previous message.
	2		(Skip next)	While playing the ICM, you can skip to the
				next message.
	9 STOP Playing			Stop playing the ICM.
93	Erase all ICM			If you hear one long beep, the erase is
				accepted. If you hear three short beeps, you
				cannot erase because all voice messages have
				not been played, or there is no voice message
				to erase.
				*This code erases all recorded messages, not
				one at a time.

94Play and Record OGM in Memory

1 Play	1 MSG CTR OGM	The fax machine plays the selected OGM. You
		can stop playing OGMs by pressing 9.
	2 F/T OGM
2 Record	1 MSG CTR OGM	After one long beep, you can record the
		selected OGM. You will hear the message
	2 F/T OGM
		played once. You can stop recording the
		message by pressing 9.

95Changing Fax Forwarding/ If you hear one long beep, the change is

Paging Setting	accepted. If you hear three short beeps, you
	cannot change it because the conditions have
1 OFF
	not been met. (Example: registering paging
2 Fax Forwarding
	number.) You can register your fax forwarding
3 Paging	number by using 4. FAX FWD NO. (See page
	9-12.) Once you have registered the number,
4 Fax Fwd No.
	the fax machine automatically will change to
	FAXFWD:ON mode. Then retrieve a Memory
	Status List by entering 9 6 1 (See page 9-11.)
	to make sure that the Fax Forwarding number
	you registered is correct in the List.

M E S S A G E C E N T E R 9 - 10