Brother 1575MC owner manual Changing Remote Retrieval Access Code, Remote Access

5

6

1

2

3

9 - 9

3

1 long beep—Fax message(s)

2 long beeps—Voice message(s)

3 long beeps—Fax and Voice message(s) No beeps—No messages

4 The fax machine then prompts you with two short beeps to enter a command. If you wait longer than 30 seconds to enter a command, the fax machine hangs up. If you enter an invalid command, the fax machine beeps three times.

The fax machine signals the kinds of messages received:

Remote Retrieval

Using Remote Access Code

1 Dial your fax number from a touch tone phone.

2 When your fax machine answers, immediately enter your Remote Retrieval Access Code.

Press 9 0 to reset the fax machine when you finish.

Hang up.

If your fax machine is set to MANUAL mode and you want to use the Remote Retrieval feature, you can access your machine by waiting about two minutes after it starts ringing, and then entering the Remote Access Code within 30 seconds.

Changing Remote Retrieval Access Code

Enter your Remote Retrieval Access Code when the fax machine picks up your call, so you can access features remotely. The access code is preset to 159, but you can change it.

Press Menu/Set, 8, 7. 7.REMOTE ACCESS

Enter a three-digit number from 000 to 999 and press Menu/Set. The “ ” cannot be changed.

Do not use the same digits that appear in your Fax Receive Code or Telephone Answer Code.

Press Stop/Exit.

M E S S A G E C E N T E R