Brother 1575MC owner manual Retrieving Memory Status List, Retrieve a Fax

	Remote Commands	Operation Details
96	Retrieve a Fax
	1 Memory Status List	Enter the number of a remote fax machine to
		receive a report or stored fax messages.
	2 Retrieve all faxes
		(See page 9-11.)
	3 Erase fax in the memory	If you hear one long beep, you can erase the fax
		message from the memory.
97 Check the Receiving Status		You can check whether your fax machine has
		received any FAX or VOICE messages. If yes,
	1 FAX
		you will hear one long beep. If no, you will
	2 VOICE
		hear three short beeps.
98	Change Answer Mode	If you hear one long beep, you can change the
		answer mode. If you hear three short beeps,
	1 MSG CTR
		you cannot change it. (Example: There is no
	2 FAX/TEL
		MSG CTR OGM when you want to change to
	3 FAX ONLY	MSG CTR mode.)
90	Exit	After a long beep, you can exit Remote
		Retrieval.

Retrieving Memory Status List

1

2

3

4

5

You can retrieve the Memory Status List from a remote fax machine to see if you have any fax messages.

Dial your fax number.

When you hear the beep, immediately enter your Remote Retrieval Access Code (1 5 9 ).

When you hear two short beeps, use the dial pad to press 9 6 1.

Using the dial pad, enter the number of the remote fax machine (up to 20 digits) where you want the Memory Status List forwarded followed by # #.

You can not use or # as dial numbers. However, if you want to store a pause, press #.

After you hear your fax machine beep, hang up and wait.

Your fax machine calls the remote fax machine. The remote fax machine prints the Memory Status List.

9 - 11 M E S S A G E C E N T E R