Brother 1575MC owner manual Setting the Speaker Volume, Making Corrections, Repeating Letters

Making Corrections

If you entered a letter incorrectly and want to change it, press to move the cursor

after the last correct letter. Then press Stop/Exit; the letters above and to the right of the cursor are deleted. Re-enter the correct text and/or digits. You can also back up and type over incorrect letters.

Repeating Letters

If you need to enter a character that is assigned to the same key as the previous

character, press to move the cursor to the right.

Special Characters and Symbols

Press		, # or 0 repeatedly or press				to move the cursor under the special character
or symbol you want. Then press Menu/Set to select it.
Press			for	(space) ! “ # $ % & ’ ( )			+ , - . /
Press	# for			: ; < = > ? @ [ ] ^ _
Press	0 for			É À È Ê Î Ç Ë Ö 0
■ If you do not enter a fax number, no additional information can be entered.
■ To enter a space, press					once between numbers and twice between characters.

■If your Station ID has already been programmed, the screen prompts “1” to make a change, or “2” to exit without changing.

Setting the Speaker Volume

You can adjust the speaker volume by pressing Speaker phone, and then selecting a speaker volume level.

Press or to adjust the volume level. The LCD shows the setting you are choosing.

Each key press changes the volume to the next setting. The new setting will remain until you change it again.

■ You can adjust the speaker volume while you are listening to your OGM (Outgoing Message) and ICMs (Incoming Messages).

■If you turn Incoming Recording Monitor to OFF (Menu/Set, 8, 5) the Speaker for screening calls with be disabled and you won’t hear callers leaving messages. The

volume for other operations can still be controlled using or .

I N I T I A L S E T U P 4 - 3