Chapter 5: Local Management

atm_stp_state:

NOTE

The atm_stp_state command is only available if an HSIM-A6DP is installed in the device (e.g.,2E43-51). This command allows the user to enable, disable, or check the current status of the Spanning Tree Algorithm on all ATM interfaces.

Syntax:

atm_stp_state [STATE]

Description:

The atm_stp_state command allows the user to

 

enable, disable, or check the status of the

 

Spanning Tree Algorithm on all ATM

 

interfaces. The user must specify the STATE

 

option as enable, disable, or status. The STATE

 

field is mandatory.

Options:

enable, disable, status

Example:

 

->atm_stp_state status

Atm Stp is Enabled

->atm_stp_state disable

->atm_stp_state enable

2314-79

5.26.2 Special Commands

done, quit, exit:

Syntax:

done, quit, or exit

Description:The done, quit, or exit command enables the user to exit from Network Tools and return to the Main Menu screen.

Options:

Not Applicable

5-94

2E43-51/2E43-51R User’s Guide

Page 142
Image 142
Cabletron Systems 2E43-51R manual Special Commands, Atmstpstate