Chapter 5: Local Management
The following briefly explains each screen accessible from the Device Configuration Menu screen:
GENERAL CONFIGURATION
The General Configuration screen allows the user to monitor and configure operating parameters for the
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows the user to enter new, change, or review the community names used as access passwords for device management operation. Access is limited based on the password level of the user. For details, refer to Section 5.8.
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the table of IP addresses used for trap destinations and associated community names. For details, refer to Section 5.9.
SWITCH CONFIGURATION
The Switch Configuration screen provides the basic setup options for making a switch operational in the network. For details, refer to Section 5.10.
SMARTTRUNK CONFIGURATION
The SmartTrunk Configuration screen allows the user to logically group interfaces to aggregate high speed uplinks. For details, refer to the SmartTrunk User’s Guide.
DEVICE SPECIFIC CONFIGURATION
The Device Specific Configuration Menu screen allows the user to select screens to configure ports or check system resources specific to the
|
