Cabletron Systems 2E43-51R manual Using Lanview

			Using LANVIEW
	Table 4-1 LANVIEW LEDs (Continued)
LED	Color	State	Recommended Action
RX	Off	No link. No activity.	No error.
(Receive)		Port enabled or
of ENET		disabled.
1 – 4 and
	Green	Blinking. Port	No error.
Ports 5
		disabled.
and 6
	Amber	Flashing. Port	No error.
		enabled, activity.
	Red	Diagnostic failure.	Contact the Cabletron
			Systems Global Call Center
			for assistance.
TX	Off	Port enabled, and no	1. Ensure that the STA is
(Transmit)		activity.	enabled and that there is a
LED of		Should flash green	valid link.
ENET		every two seconds	2. Contact the Cabletron
1 – 4 and		indicating BPDUs	Systems Global Call Center
Ports 5		being sent if STA is	for assistance.
and 6		enabled and there is a
		valid link.
	Green	Flashing. Indicates	No action.
		activity. Rate indicates
		data rate.
	Amber	Blinking. Port in	1. Ensure that the port is not
		standby.	disabled.
		Port may be disabled	2. Contact the Cabletron
		due to Spanning Tree.	Systems Global Call Center
			for assistance.
	Red	Flashing. Indicates	No action.
		collision rate.
		Solid. Diagnostic	Contact the Cabletron
		failure.	Systems Global Call Center
			for assistance.
LINK	Amber	Solid. A link is	No action.
Ports of		established with the
ENET		device connected to
1 – 4		the port.
		Flashing. Link	No action.
		established, but
		administratively
		disabled.
		Off. No link.	No action.

2E43-51/2E43-51R User’s Guide 4-3