Chapter 5: Local Management
If the COM port is reconfigured without a valid IP address set
!on the device, the message shown in Figure
CAUTION | Do not continue unless the outcome of the action is fully |
| |
| understood. |
WARNING
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE THIS COM PORT?
YES | NO |
174252
Figure 5-13 COM Port Warning Screen
3.Use the arrow keys to highlight YES. Press ENTER.
4.If you ENABLED the port, proceed to step 5. If you DISABLED the port, use the arrow keys to highlight SAVE at the bottom of the screen, then press ENTER.
5.When the message “SAVED OK” appears, the edits you made are saved.
Exiting without saving causes the message “NOT SAVED
!PRESS SAVE TO KEEP CHANGES” to appear. Exiting without
saving causes all edits to be lost.CAUTION
6.Use the arrows keys to highlight the Application field.
|
