Cabletron Systems 2E43-51R manual Shows which ports are currently set as destination ports

Chapter 5: Local Management

To access the Port Redirect Function screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the PORT REDIRECT FUNCTION menu item and press ENTER. The Port Redirect Function screen displays.

Event Message Line
	2H43-51 LOCAL MANAGEMENT
	Port Redirect Function
Device Type: 2H43-51		Firmware Revision:		XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
Source Port:	Destination Port:	Remap Errors:
============	============	============
1	2	ON
1	3	ON
1	4	ON
2	1	OFF
2	3	OFF
3	4	ON
3	5	ON
3	6	ON
Source Port [1]	Destination Port [1]	Errors	[ON]	Status [ADD]
				RETURN
SAVE	NEXT	PREVIOUS	EXIT		RETURN

22511_22

Figure 5-23 Port Redirect Function Screen

The following definitions briefly explain each field of the Port Redirect Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports. To display the ports, refer to Section 5.16.1.

Destination Port (Read-only)

Shows which ports are currently set as destination ports.

Remap Errors (Read-only)

Displays whether the corresponding source ports are configured (ON) to send errored frames to the destination ports, or (OFF) to drop all errored frames and only forward traffic without errored frames to the destination ports.

5-56 2E43-51/2E43-51R User’s Guide