Cabletron Systems 2E43-51R manual High Speed Interface Configuration Menu Screen

Chapter 5: Local Management

5.13HIGH SPEED INTERFACE CONFIGURATION MENU SCREEN

The High Speed Interface Configuration Menu screen, Figure 5-20, applies to the Fast Ethernet Interface Modules and the High Speed Interface Module.

NOTE

This screen does not display unless one or two Fast Ethernet Interface Modules and a High Speed Interface Module (HSIM) are installed.

If only the Fast Ethernet Interface Module(s) or the HSIM is installed, then the respective Fast Ethernet Interfaces screen or the HSIM Setup screen displays instead of the High Speed Interface Configuration Menu screen.

To access the High Speed Interface Configuration Menu screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the HIGH SPEED INTERFACE CONFIGURATION menu item and press ENTER. The High Speed Interface Configuration Menu screen displays.

Event Message Line

	2E43-51 LOCAL MANAGEMENT
	High Speed Interface Configuration Menu
Device Name: 2E43-51	Firmware Revision:	XX.XX.XX
	BOOTPROM Revision: XX.XX.XX
	FAST ETHERNET INTERFACES
	HSIM
SAVE
	EXIT		RETURN

22511-53

Figure 5-20 High Speed Interface Configuration Menu Screen

5-44 2E43-51/2E43-51R User’s Guide