Cabletron Systems 2E43-51R manual Repeater Statistics Screen, Network # Port #

Repeater Statistics Screen

3.Press ENTER (neither the RMON Index # field nor the statistics will change until ENTER is pressed).

5.24.2 Using the Clear Counters Command

To reset all the statistics counters of the selected interface to zero, perform the following steps:

1.Use the arrow keys to highlight the CLEAR COUNTERS field.

2.Press ENTER, the counters for the selected index are reset to zero.

5.25REPEATER STATISTICS SCREEN

Operating statistics for each repeater port (1 through 48) and its corresponding network (ENETs 1 through 4) are displayed via the Repeater Statistics screen shown in Figure 5-32.

To access the Repeater Statistics screen, use the arrow keys to highlight the REPEATER STATISTICS menu item on the Device Statistics Menu screen and press ENTER. The Repeater Statistics screen displays.

Event Message Line

	2E43-51 LOCAL MANAGEMENT
	Repeater Statistics
Device Name: 2E43-51		Firmware Revision:	XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
	Network #: xx	Port #: xx
Bytes Received:	7500456	7500456
Frames received:	6789	6789
Total Errors:	0	0
Collisions:	0	0
OOW Collisions:	0	0
CRC Errors:	0	0
Alignment Errors:	0	0
Undersize Packets:	0	0
Oversize Packets	0	0
Broadcasts	0	0
Multicasts:	0	0
Link Status:	Link	No Link
Admin Status:	Enabled	Disabled
PORT #: nn
	CLEAR COUNTERS	EXIT		RETURN

22511-29

Figure 5-32 Repeater Statistics Screen for Repeater Ports (1 – 48)

2E43-51/2E43-51R User’s Guide 5-81