CHAPTER 2
NETWORK REQUIREMENTS
This chapter contains networking guidelines. Before installing and using the 2E43-51 or an optional Fast Ethernet Interface Module (FE-100TX,FE-100FX, or FE-100F3), review the requirements and specifications outlined in this chapter concerning the following:
•SmartTrunk (Section 2.1)
•10BASE-T Twisted Pair Network (Section 2.2)
•100BASE-TX Twisted Pair Network (Section 2.3)
•100BASE-FX Fiber Optic Network (Section 2.4)
The network installation must meet the guidelines to ensure satisfactory performance of this equipment. Failure to follow the guidelines may produce poor network performance.
The Cabletron Systems Cabling Guide and SmartTrunk User’s Guide, referred to in the following sections, can be found on the Cabletron Systems World Wide Web
site: http://www.cabletron.com/
2.1SmartTrunk
To connect the 2E43-51 into a network so that it can take advantage of the SmartTrunk feature, there are certain rules concerning port connections and configurations that must be followed for proper operation. Refer to the Cabletron Systems SmartTrunk User’s Guide for additional information.
2.210BASE-T NETWORK
When connecting a 10BASE-T segment to any of the 2E43-51 ports (ENET 1 through ENET 4), ensure that the network meets IEEE 802.3 Ethernet network requirements for 10BASE-T. Refer to the Cabletron Systems Cabling Guide for details.
2E43-51/2E43-51R User’s Guide | 2-1 |
