Chapter 5: Local Management
5-8 2E43-51/2E43-51R User’s Guide
5.4 ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Local
Management Password screen Figure 5-3. Whenever a connection is
made to the 2E43-51 the Local Management Password screen displays.
Before continuing, the user must enter a password (community name)
which is compared to the previously stored passwords. The level of access
allowed the user depends on the password. To set or change passwords,
refer to Section 5.8. The following steps describe the procedure to access
Local Management.
1. Turn on the terminal. Press ENTER (up to four times) until the
2E43-51 Local Management Password screen displays. It is the
automatic line speed seeking feature of the port that makes it necessary
at times to press ENTER several times.
Figure 5-3 The 2E43-51 Local Management Password Screen
2. Enter the Password and press ENTER. The default super-user access
password is “public” or press ENTER.
2E43-51 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1997
Device Serial Number: XXXXXXXXX
Device Hardware Revision: XX
Device Firmware Revision: X.XX.XX
Device BOOTPROM Revision: X.XX.XX
Enter Password:
22511-12
Event Message Line