Port Level Security Configuration Screen

7.Use the arrow keys to highlight the SendTrap field.

8.To change the SendTrap setting to NoTrap, press the SPACE bar to toggle the setting.

9.To change the security on more than one connector, repeat steps 1 through 8 for each connector. Then proceed to step 10 to save all settings at once.

10.Use the arrow keys to highlight the SAVE command.

11.Press ENTER. The message “SAVED OK” displays and all ports of the connector are set to the selected operating mode.

5.20PORT LEVEL SECURITY CONFIGURATION SCREEN

The Port Level Security Configuration screen, Figure 5-27, functions similarly to the Repeater Level Security Configuration screen, except that it is used to set the security of each port of a connector.

To access the Port Level Security Configuration screen, use the arrow keys to highlight the PORT LEVEL SECURITY CONFIGURATION menu item on the Repeater Configuration Menu screen and press ENTER. The Port Level Security Configuration screen displays.

2E43-51/2E43-51R User’s Guide

5-65

Page 113
Image 113
Cabletron Systems 2E43-51R manual Port Level Security Configuration Screen