■Cleaning tape
Use the
1Press the cover release button and open the tape compartment cover.
2Remove the tape cassette and install the cleaning tape.
3Close the tape compartment cover.
4Press the feed/cut button. →Cleaning will start.
5Press the cover release button and open the tape compartment cover.
When the rollers stop, press the cover release button.
6Remove the cleaning tape, reinstall the tape cassette, and then close the tape compartment cover.
Note
●For further details on using the cleaning tape, refer to the instruction manual included with the cleaning tape.
Cleaning the cutter
If the printed labels are not ejected from the
1Turn off the
2Press the cover release button and open the tape compartment cover.
3Remove the tape cassette.
4Use a cotton swab to clean the cutter.
Cutter blade
Cotton swab
Metal section
104