→Installation begins.

→When installation is complete, the message “Installation is done.” appears.

5Click [Quit].

6Click [Restart].

→Installation of P-touch Quick Editor is complete, and the Macintosh will restart.

7After the Macintosh restarts, connect the PT-9500PC to the Macintosh with the USB interface cable, and then turn on the PT-9500PC.

For details, refer to “Connecting to a personal computer” (→ P.16).

Proceed to “Selecting the printer” (→ P.52).

Installing the printer driver only

Install only the necessary printer driver to use the PT-9500PC as a printer.

Note

●Do not connect the USB interface cable to the Macintosh until the printer driver has been installed and the Macintosh has been restarted. If the USB interface cable is already connected to the Macintosh, remove the USB interface cable.

1Start the Macintosh, and then insert the CD-ROM into the CD-ROM drive.

→The P-touch window appears.

2Double-click the Mac OS 9 folder.

→The Mac OS 9 window appears.

3Doublefolder. -click the P-touch Editor 3.2

→The P-touch Editor 3.2 window appears.

50