Preparations before creating labels

Before creating labels with the PT-9500PC, the following preparations are necessary.

Note

●The connection procedures are different depending on the operating system running on the

personal computer and whether a serial connection or USB connection is used. For details, refer to “Installing the software” (→ P.23).

Installing the software

Install the printer driver to use the PT-9500PC as a printer with the personal computer and install the label design software. For details, refer to “Installing the software” (→ P.23).

Connecting the PT-9500PC

Connect the PT-9500PC to the power source and a personal computer.

For details, refer to “Connecting the PT-9500PC” (→ P.15).

Creating labels

After preparing the PT-9500PC, start creating labels.

For details, refer to “Creating labels: Windows version” (→

P.67) or “Creating labels: Macintosh version” (→ P.85).

14