Installing P-touch Quick Editor and the printer driver

Install P-touch Quick Editor to print labels using simple operations and the printer driver.

Note

●Do not connect the USB interface cable to the Macintosh until the software has been installed and the Macintosh has been restarted. If the USB interface cable is already connected to the Macintosh, remove the USB interface cable.

1Start the Macintosh, and then insert the CD-ROM into the CD-ROM drive.

→The P-touch window appears.

2Double-click the Mac OS 9 folder.

→The Mac OS 9 window appears.

3Double-click the P-touch Quick Editor Installer icon.

→The Installer starts.

4Confirm the drive to install the software to, and then click [Install].

To change the drive, click [Drive].

Clicking Custom Install displays a dialog box that allows you to select which options to install. Only the options with a check mark beside them are installed. Clear the check marks from the programs you do not want to install.

The programs that can be installed are listed below.

Program

Description

 

 

P-touch Quick

P-touch Quick Editor

Editor

software

 

 

PT-9500PC Driver

Printer driver for the

PT-9500PC

 

 

 

•If custom installation is not selected, all of the programs will be installed. Approximately 20 MB of available hard-disk space is required.

Installing the software

49