Installing P-touch Editor only

Install P-touch Editor 4.0 to design labels.

1Start the personal computer, and then insert the CD-ROM into the CD-ROM drive.

→The Brother Setup dialog box appears.

•It may take a short time until the Brother Setup dialog box appears.

•If the Brother Setup dialog box does not appear, double-click the My Computer icon, and then double-click the P-touch icon.

2Select the desired language, and then click [OK].

3Click the button for Advanced setup.

→The dialog box to select the software to install appears.

4Click the button for P-touch Editor.

5Follow the instructions on each dialog box and start installation.

Refer to steps 5-ain “Installing using basic setup” (→ P.27).

→The User Registration dialog box appears.

6Selectclick [Next].“Yes, display the page.”, and then

→The InstallShield Wizard Complete dialog box appears.

7Click [Finish].

→P-touch Editor will be installed and the dialog box in step 3 appears again.

When installing the printer driver as well, proceed to step 4 in “Installing the printer driver only” (→ P.36).

32