3Check the tape cassette.
Make sure that the end of the tape is not bent and that it is routed correctly through the tape guides.
End of the tape | Tape guides |
4Install the tape cassette.
Be sure to install the tape cassette in the correct direction.
5Close the tape compartment cover.
6Press the power button on the
Before use
Power button
→The power button will light (green).
•If the tape compartment cover is not completely closed or if the tape cassette is not installed correctly, the ERROR
lamp will light. In this case, repeat the procedure from step 2.
7Press the feed/cut button.
Feed/cut button
→Remove the tape slack.
Note
●If no additional operation is performed within 10 minutes after printing a label, the roller holder will automatically release and a sound may be produced. Due to this function, the tape cannot be removed if the AC adapter is removed from the
21