Changing the USB ID mode
When multiple PT-9500PCs are used, the USB ID mode can be changed to recognize and use each PT-9500PC individually or to recognize all of the PT-9500PCs as a single printer.
Recognizing the PT-9500PCs individually If the ID mode (see back of machine) is set to “1,” install a separate printer driver for each PT-9500PC.
Each PT-9500PC will then be recognized as a different printer by the personal computer.
Recognizing the PT-9500PCs as a single printer.
If the ID mode is set to “2,” install the printer driver one time only and then multiple PT-9500PCs can be used as the same printer. Even if you connect a different PT-9500PC to the personal computer, the PT-9500PC can be used without any additional setup.
Note
●The USB ID switch is usually set to “2.”
1Turn off the PT-9500PC and the personal computer.
2Remove the USB interface cable from both the PT-9500PC and the personal computer.
3Change the USB ID switch on the back of the PT-9500PC.
4Connect the USB interface cable to the PT-9500PC and the personal computer.
5Turn on the PT-9500PC, and then turn on the personal computer.
