Brother Computerized Embroidery Machine Attaching the Embroidery Unit, Barm, CTurn on the machine

————————————————————————————————————————————————————

Attaching the Embroidery Unit

This section describes how to attach the embroidery unit. Before turning on the machine, attach the		1
embroidery unit to it. If the embroidery unit is not attached, the machine does not operate.
Embroidery unit precautions	Attaching the embroidery unit
Cautions for the embroidery unit will be explained	Get the included embroidery unit ready.
below.

CAUTION

●Do not move the machine with the embroidery unit in place. The embroidery unit may be dropped and cause injury.

●Keep your hands and other objects away from the embroidery carriage and frame. Otherwise injury may result.

aTurn off the machine.

Note
z Do not touch the connector in the
embroidery unit connector slot. The
connector could be damaged, and it may
cause malfunctions.	Slide the embroidery unit onto the machine
z Do not lift up on the embroidery carriage,	barm.
and do not forcefully move it. It may cause	Push it in until it clicks and stops.
malfunctions.

X The embroidery unit is attached.

cTurn on the machine.

• For details, refer to “Turning on the machine” (page 19).

X The confirmation message is displayed.

Attaching the Embroidery Unit 15