Brother Computerized Embroidery Machine operation manual Appliquéing, Embroidering

————————————————————————————————————————————————————

Appliquéing

Prepare the base fabric and the appliqué fabric

(appliqué piece). Press (Settings key), and set

the thread color display to NAME OF COLOR, so

“APPLIQUE MATERIAL”, “APPLIQUE POSITION” and “APPLIQUE” are displayed on the screen.

dRemove the fabric from the embroidery frame, and cut it out along the cut-out line.

Cut carefully along the stitching and remove the thread.

aSelect an appliqué pattern.

• If it is not cut right on the stitching, it will not be finished neatly.

eStretchframe. the base fabric on the embroidery

2

bWhen “APPLIQUE MATERIAL” is displayed on the screen, apply iron-on stabilizer to the back of the appliqué piece fabric, and stretch it on the embroidery frame.

cLower the presser foot lever, and press (Start/stop button).

XThe cut-out for the appliqué piece is sewn, and the machine stops.

1

2

aCut-out line

bAppliqué piece fabric

X“APPLIQUE POSITION” will be displayed on the screen.

fSet up the thread for appliquéing.

gLower the presser foot lever, and press (Start/stop button).

X The position for the appliqué is stitched, and the machine stops.

1

2

aAppliqué position

bBase fabric

X“APPLIQUE” will be displayed on the screen.

hApply a thin layer of fabric glue or spray adhesive to the back of the appliqué piece, and attach it in the appliqué position.

Embroidering 59