Turning on the machine
Before turning on the machine, be sure to attach the embroidery unit to it. If the embroidery unit is not attached, the machine does not operate. (For details, refer to “Attaching the Embroidery Unit” (page 15).)
Prepare the included power cord.
aMake sure that the machine is turned off (the main power switch is set to “
”), and then plug the power supply cord into the power supply jack on the right side of the machine.
bInsert the plug of the power supply cord into a household electrical outlet.
1
aPower supply jack
cPress the right side of the main power switch on the right side of the machine to turn the machine on (set it to “”).
XThe lamps, LCD and 
(Start/stop button) light up when the machine is turned on.
Turning off the machine
When you are finished using the machine, turn it off. |
|
In addition, before transporting the machine to | 1 |
another location, be sure to turn it off. |
aMakestopped.sure that the machine is completely
bPress the left side of the main power switch on the right side of the machine to turn the machine off (set it to “ 
”).
XThe lamps go off when the machine is turned off.
cUnplug the power supply cord from the electrical outlet.
Grasp the plug when unplugging the power supply cord.
dUnplug the power supply cord from the power supply jack.
Note
zIf a power outage occurs while the machine is being operated, turn off the machine and unplug the power supply cord. When restarting the machine, follow the necessary procedure to correctly operate the machine.
(For U.S.A. only)
zThis appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
