Brother Computerized Embroidery Machine operation manual Embroidering a pattern

————————————————————————————————————————————————————

Embroidering a pattern

Embroidery patterns are embroidered with a change of thread after each color.

aPrepareon the screen.embroidery thread of the color shown c

a

b

d e

aEmbroidery frames that can be used for embroidering

bCurrent color step/Number of colors in design

cCurrent name of color

dCurrent color part

eNext color part

•The thread color number set displayed for the

thread colors can be changed. Press (Settings key), and then change the setting in the settings screen. For details, refer to “LCD (liquid crystal display) operation” (page 50).

†Example: Embroidery thread number selected

2

bSet the embroidery thread, thread the needle, then pass the end of the thread through the embroidery foot hole.

Give the thread a little slack.

•Refer to “Threading the upper thread” (page 30) and “Threading the needle” (page 32).

Note

zBefore using the needle threader, be sure to lower the embroidery foot.

CAUTION

●If the thread is pulled too tight, the needle may break or bend.

●Do not let hands or objects hit the carriage while embroidering. The pattern may misalign.

Embroidering 57