Names of Machine Parts and Their Functions
The names of the various parts of the machine and their functions are described below. Before using the machine, carefully read these descriptions to learn the names of the machine parts.
Front view
aThread guide plate
Pass the thread around the thread guide plate when threading the upper thread.
bThread guide cover
Like with the thread guide plate, pass the thread around the thread guide cover when threading the upper thread.
cSpool pin
Place a spool of thread on the spool pin.
dBobbin winding thread guide
Pass the thread around this thread guide when winding the bobbin thread.
eTop cover
Open the top cover to place the spool of thread on the spool pin.
fBobbin winder
Use the bobbin winder when winding the bobbin.
gOperation panel
From the operation panel, patterns can be selected and edited, and operations for using the machine can be displayed (page 11).
hEmbroidery unit connector slot
Plug in the connector for the embroidery unit.
iPresser foot lever
Raise and lower the presser foot lever to raise and lower the presser foot
jOperation buttons
Use these buttons to operate the machine.
kEmbroidery unit
Attach the embroidery unit to the machine, and then attach the embroidery frame.
lThread cutter
Pass the threads through the thread cutter to cut them.
mNeedle threader lever
Use the needle threader lever to thread the needle.
nThread
Look through the window to check the position of the
8